Hi guys, i´m a new member from chile so... if it´s there´s some presentation rules please let me know (i´ll do it as soon as posible).
right now i´m desperated, i just bought a 2012 yamaha r1 early in january, i´ve had a few bikes before this awesome machine (an gsxr750 slingshot 89, Fz6n, Fz1s, triumph street triple) but nothing compares to this monster.
so to the issue, i had a crash at the end of february by gravel on the road, i was going at about 100+ ( i got multiple fractures but nothing too heavy, pelvis, pubis, and a couple of apophysis, lef and right at L3-L5) i´m already walking and i want to restore my bike as soon as posible.
the bike got all the front end twisted (forks and wheel) and i guess already take care of that (straighten the lower triple, and re-aling everything) the subframe has a little crack (i hope this can be welded), almost every plastic is gone (this dont bother me the most) the gauges are wasted (all the lcd screen is crack) the headlight and a big etc...
also the engine got the cranckshaft cover broken (i replaced already).
so the real problem now is that a tried to start the bike (please remeber that the gauges are broken) and the check engine light went on, the fuel pump does his job, the rollover sensor isn´t stuck, the battery is almost new, So a disarmed everything, remove the gas tank, remove the air filter housing and box, and got to see the throttle bodies, and here lies the real thing... wen i put the ignition on the throttle bodies wont open (as they normaly do at every engine start) and the throttle wont open them also, there is a loud noise in the throttle servo sector, and if i try to open the throttle with the ignition on the valves tri to open but it looks like there is a short circuit and it just sound scary( i´ll leave a video later of this so you can see better) and the bike wont start...
i have a friend now on miami and he can bring me the sensors that i need, but a just donk know which one to buy, any help will be realy great.
sorry about the brick-thread ;)
and congrats for this awesome forum you got guys.
right now i´m desperated, i just bought a 2012 yamaha r1 early in january, i´ve had a few bikes before this awesome machine (an gsxr750 slingshot 89, Fz6n, Fz1s, triumph street triple) but nothing compares to this monster.
so to the issue, i had a crash at the end of february by gravel on the road, i was going at about 100+ ( i got multiple fractures but nothing too heavy, pelvis, pubis, and a couple of apophysis, lef and right at L3-L5) i´m already walking and i want to restore my bike as soon as posible.
the bike got all the front end twisted (forks and wheel) and i guess already take care of that (straighten the lower triple, and re-aling everything) the subframe has a little crack (i hope this can be welded), almost every plastic is gone (this dont bother me the most) the gauges are wasted (all the lcd screen is crack) the headlight and a big etc...
also the engine got the cranckshaft cover broken (i replaced already).
so the real problem now is that a tried to start the bike (please remeber that the gauges are broken) and the check engine light went on, the fuel pump does his job, the rollover sensor isn´t stuck, the battery is almost new, So a disarmed everything, remove the gas tank, remove the air filter housing and box, and got to see the throttle bodies, and here lies the real thing... wen i put the ignition on the throttle bodies wont open (as they normaly do at every engine start) and the throttle wont open them also, there is a loud noise in the throttle servo sector, and if i try to open the throttle with the ignition on the valves tri to open but it looks like there is a short circuit and it just sound scary( i´ll leave a video later of this so you can see better) and the bike wont start...
i have a friend now on miami and he can bring me the sensors that i need, but a just donk know which one to buy, any help will be realy great.
sorry about the brick-thread ;)
and congrats for this awesome forum you got guys.